LED Stadium Lights For Baseball Field

A Complete Guide on Lighting Design: Baseball Field LED Lighting

blog-5-banner

Table of Contents

Looking for the best LED stadium light? Baseball is among one of the most popular and commonly played sports. Also known as sandlot or baseball diamond, it is a field where baseball is played. The baseball field is compatible with the world-class tournament like Major and Minor League Baseball.

One of the most important aspects of the baseball field is the lighting. Without a doubt, lights have an indispensable role in gameplay. A good lighting system will illuminate the whole field completely. There are different types of lighting solutions, the best one is LED lights.

LED lights are capable of brightening up the whole field with even distribution of light. This type of lighting enhances the vision for both, players, and spectators. It has a direct impact on the performance of players. Moreover, LED lights are cost-efficient, saving 80% of energy. The maintenance cost of LED lights is less to zero. This is because LED lights can last for a long time. LEDLUCKY offers a wide range of LED lights that are perfect for illuminating stadiums.

When it comes to installing LED lights, you must consider various factors. In this post, we have created a buying guide for the right LED lights for your needs.

Lighting Requirements of a Baseball Stadium

For having a well-lit stadium, you must follow standards and requirements. Following are the requirements for lighting up a baseball stadium:

1. Brightness Level

The most important aspect of stadium lighting is the brightness level. It is measured in lux; the brightness requirement for matches is different. The brightness should be according to the following instructions:

– Recreational Game

  • Infield- 300 lux
  • Outfield- 200 lux

– Amateur Game

  • Infield- 500 lux
  • Outfield- 300 lux

– General Game

  • Infield- 1000 lux
  • Outfield- 700 lux

– Professional Game

  • Infield- 1500 lux
  • Outfield- 1000 lux

2. Light Pollution Design

One of the most important requirements for the baseball field lighting is minimal pollution design. The light should be positioned in a place that the influence of outflow lighting is minimized along with the waste of unnecessary light.

Moreover, the light must be installed in a way that doesn’t affect the pedestrians, residents of nearby areas and drivers.

blog-5-1

3. Light Should not Flicker

In baseball, the maximum speed of the ball is, approximately, 100 to 150 km/h. If the light flickers, the vision of the players and spectators will be compromised. It means there is a really good chance that players will miss an important moment. LEDLUCKY offers high-quality LED lights that support the high-speed camera.

blog-5-2

4. Anti-glare Lens

It is crucial for the light to have a great glare control system. Even in LED light glare occurs, but it can be controlled through an anti-glare lens. The glare can cause discomfort for everyone including spectators and players. It will even negatively affect the performance of the players.

blog-5-3

Lighting Design of Baseball Field

There is no universal lighting design that fits every stadium. This is because every sport has different lighting requirements. The baseball field must be well-lit so the players and audience can clearly see what is happening. At the same time, the glare should be minimized. This is because glare can irritate the eyes, and negatively impacts the vision.

This is the reason why the baseball filed layout is divided into outfield and infield. It ensures that illuminance and uniformity of the light are proper. The lights in a baseball stadium must be installed in a position where the gaze of the players moves during batting, pitching, and catching.

There are different things that you need to focus on when installing the baseball field light. Here are some of the factors.

blog-5-4

1. Height of Light Poles

One of the first things you need to consider is the height of the lighting pole. The height of the lighting fixtures is crucial for illuminating the whole stadium. The lighting pole should be positioned in a way that the glare doesn’t occur directly into the eyes of the players.

2. Position of Light Fixtures

When installing the light, you have to consider the position of the light pole. Depending on the competition, light poles may vary from 4-poles, 6-poles, and 8-poles. For providing great illumination, you should go with 8-poles.

3. Design for International Competitions

For international competitions, lighting aiming design must be followed. The aim design must be in accordance with the shadows of the players and uniformity of the stadium. It should be installed in a position that doesn’t affect the spectators and athletes.

In addition, the horizontal surface brightness of the baseball field must be categorized into outfield and infield. The vertical surface of illuminance is another thing you need to keep in mind. This is because the balls in the baseball fields often go high in the stadium.

4. Design for Broadcasting

Without a doubt, baseball is high-speed sports. It is one of the most popular and watched sports, which is often broadcasted. When you are designing the baseball LED stadium light, you have to keep in mind the position of the camera. This is to make sure the broadcast camera has a proper and clear view of the game. It is advised to pre-review the camera location before finalizing the design to ensure the light is evenly distributed.

Things to Consider When Choosing the Best LED Baseball Field Lights

When it comes to choosing an LED baseball field light, it can prove to be a daunting task as there are plenty of things to consider. Have a look at some of the factors.

1. Lux Level

One of the first things you need to pay attention to is the brightness level. For enhancing the performance and the vision of players and spectators, high brightness level is required. LED lights are capable of providing high lux levels in comparison to traditional lights.

2. Energy Efficient

LED lights are known for saving energy and having a long lifespan. So, you have to make sure you are getting high-quality LED lights.

3. Optical Design

The LED lights have an advanced system that will minimize the glare and spill light. The linear light is used for decreasing the residual light and improve the central light intensity.

4. Waterproof

Another factor that you have to consider is that the LED light must be water-resistant and anti-corrosion. Since outdoor lighting is more demanding, you must choose a light that performs well in all types of harsh weather.

blog-5-5

5. Time It Takes to Start

LED lights don’t need any warm-up time. This means they will illuminate the whole area without causing any delays.

6. Heat Dissipation

The cooling system for LED is crucial as persistent and strong heat might damage the LED chips. To improve the lifespan of the light, a patented cooling system is designed. This is to make sure the LED light performs well.

7. Cost of Maintenance

LED lights are designed to reduce maintenance cost. Since these lights have a longer lifespan, they will last for at least 80,000 hours. So, you don’t have to worry about maintenance costs.

Cost of Installing Baseball Field Lighting

It is recommended that before buying LED lighting for baseball lighting, you need to have a rough idea of how much it will cost. When you are calculating the cost of LED lighting, you have to consider the electricity cost, maintenance cost, shipping cost, installation cost, and much more.

1. Country it is Manufactured in

Many people avoid buying LED lights from China because of the misconception that they produce low-quality products. So, many people buy lights that are made in the EU. China is a huge country having great production. This means the labor cost, raw materials and factor rent is low. The products you can get from China are more economical.

For instance, if you buy LED lights for the baseball field from China, it might cost around the US $40,000 to 90,000. However, if you get LED lights produced in the EU, it might cost three times more than this.

2. Lighting Type

Another factor that determines the cost of lighting is the type of lighting you choose. There are many different types of light, still, the most affordable is LED light. This is because LED lights have a longer lifespan in comparison to traditional lamps. It helps in saving energy; you can approximately save 70% on the energy bill.

3. Competition Standard

The standard of competition also has an impact on the cost. Keep in mind, the more professional the baseball game is, the higher the cost of lighting the stadium will be. For instance, the cost of lighting a stadium for recreational purposes is between $40,000 to $60,000, then for a professional game, it might be three times higher.

4. Operating Cost of Baseball Stadium

To understand this, you have to take a look at an example. For instance, we need 30,000W LED for lighting up the baseball field. The lights are turned on for 8 hours a day and running cost is $0.12/1000. The total cost for a day might be 30,000 x 8 x 0.12/1000 = $28.8.

Conclusion

Therefore, baseball field lighting has a huge role to play in the performance and safety of players. This is why it must be diligently planned. Thanks to this guide, you can choose and install the right LED lights in the stadium.

If you still have any problem, LEDLUCKY is here to help you. Our team of experts is always ready and willing to help you design, buy, and install lighting correctly. For more information, kindly send us a message at email [email protected].

See the LED Stadium Light

Others Blogs

Related Products

Alpha

Alpha

Products-Agility

Agility

Products-ArenaPro

Arenapro

VariFlood GEN II-main

VariFlood GEN II

Don't hesitate to tell us about your needs

Choose your language

English
عربي
français
italiano
日本語
Deutsch
español
português

Tell us your special custom needs

Succeeded
Thank you for your email, we will reply you as soon as possible

Tell us your special custom needs

Tell us your special custom needs